EXHAUST GAS TEMPERATURE SENSOR(for Front) REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here

  2. REMOVE EXHAUST GAS TEMPERATURE SENSOR

    CAUTION:

    To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


    1. A01XJUM

      Disconnect the 3 connectors from the 3 exhaust gas temperature sensors.

    2. A01XF6Q

      Remove the nut and disconnect the No. 3 exhaust gas temperature sensor from the No. 1 vacuum pipe.

    3. A01XHB7

      Remove the bolt and open the clamp of the pipe clamp.

    4. Detach the 3 connectors from the pipe clamp.

    5. A01XFCO

      Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor from the exhaust manifold converter sub-assembly.

    6. A01XELO

      Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor from the exhaust manifold converter sub-assembly.

    7. A01XKG5

      Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor from the exhaust manifold converter sub-assembly.