AIR SWITCHING VALVE(for Bank 1) REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE V-BANK COVER

    Click here

  3. REMOVE AIR CLEANER CAP AND HOSE

    Click here

  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY


    1. Remove the air cleaner filter element.

    2. B001DKZ

      Detach the wire harness clamp.

    3. Remove the 3 bolts and air cleaner case.

  5. DISCONNECT WATER HOSE JOINT


    1. B001IE6

      Remove the bolt and disconnect the water hose joint.

  6. REMOVE AIR TUBE


    1. B001I98

      Remove the 2 bolts, 2 nuts and air tube.

    2. Remove the 2 gaskets from the air tube.

      Note

      Be careful not to damage the installation surface of the gaskets.

  7. REMOVE EMISSION CONTROL VALVE SET


    1. B001CHE

      Disconnect the emission control valve set connector.

    2. Disconnect the No. 1 air hose from the emission control valve set.

    3. B001D5E

      Remove the 3 nuts and emission control valve set.