FUEL PUMP(for 5 Door) REASSEMBLY

CAUTION / NOTICE / HINT

Note

Do not disconnect the hoses indicated in the illustration.

B001F54E01
Text in Illustration
*A for Single Tank Type *B for Double Tank Type

Tech Tips

Perform "Inspection After Repairs" after replacing the fuel pump Click here.

PROCEDURE


  1. INSTALL FUEL PUMP

    Tech Tips

    Perform "Inspection After Repairs" after replacing the fuel pump Click here.


    1. Connect the fuel pump wire harness connector to the fuel pump.

    2. B001CU2E01
      Text in Illustration
      *1 Fuel Pump Spacer
      *a O-Ring

      Apply a light coat of gasoline to a new O-ring. Then install the fuel pump spacer and O-ring to the fuel pump.

    3. B001G7ZE01
      Text in Illustration
      *1 Fuel Filter Case

      Attach the 5 claws to the claw holes to install the fuel pump to the fuel filter case.

  2. INSTALL NO. 1 FUEL SUCTION SUPPORT


    1. Install the No. 1 fuel suction support and attach the 2 claws.

  3. INSTALL NO. 1 FUEL SUB-TANK (for Single Tank Type)


    1. B001D5V

      Attach the 2 claws to the claw holes to install the No. 1 fuel sub-tank.

    2. B001IMN

      Attach the 3 claws to the claw holes.

    3. Install the tube part to the No. 1 fuel sub-tank.


      1. B001CWVE01

        Attach the claw on the end of the tube to the claw hole. Install the tube to the 2 clamps on the No. 1 fuel sub-tank.

    4. Connect the jet pump to the No. 1 fuel sub-tank.

      Text in Illustration
      *1 Jet Pump
    5. B001D54

      Attach the fuel pump wire harness clamp.

    6. Connect the fuel pump connector.

  4. INSTALL NO. 1 FUEL SUB-TANK (for Double Tank Type)


    1. B001D5V

      Attach the 2 claws to the claw holes to install the No. 1 fuel sub-tank.

    2. B001H71

      Attach the 3 claws to the claw holes.

    3. B001DYDE01
      Text in Illustration
      *1 Jet Pump A
      *2 Jet Pump B

      Apply a light coat of gasoline to a new O-ring. Then install the O-ring to the jet pump B.

    4. Connect the jet pump A and attach the 2 claws.

    5. Connect the jet pump labeled B to the No. 1 fuel sub-tank.


      1. B001GBRE02
        Text in Illustration
        *1 Jet Pump A
        *2 Jet Pump B

        Attach the claw on the end of the tube to the claw hole.

    6. Connect the jet pump labeled A to the No. 1 fuel sub-tank.

    7. B001CN1

      Attach the fuel pump wire harness clamp.

    8. Connect the fuel pump connector.

  5. INSTALL FUEL SENDER GAUGE ASSEMBLY (for Single Tank Type)

    Click here

  6. INSTALL FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type)

    Click here