FUEL PRESSURE PULSATION DAMPER REMOVAL

PROCEDURE

1. DISCHARGE FUEL SYSTEM PRESSURE

   Click here

2. PRECAUTION

   Note

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. DISCONNECT FUEL HOSE

   Click here

5. REMOVE FUEL PRESSURE PULSATION DAMPER ASSEMBLY

   

   
   

   1. Remove the 2 bolts and fuel pressure pulsation damper assembly.

   2. 

      Text in Illustration

      *a

      O-ring

      Remove the O-ring from the fuel pressure pulsation damper assembly