FUEL PRESSURE REGULATOR REMOVAL

PROCEDURE


  1. DISCHARGE FUEL SYSTEM PRESSURE

    Click here

  2. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

    Click here

  5. DISCONNECT NO. 2 FUEL HOSE

    Click here

  6. REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

    B001I7P

    1. Disconnect the purge VSV connector.

    2. Detach the wire harness clamp.

    3. Remove the bolt and disconnect the wire harness clamp bracket.

    4. B001CSE

      Remove the 3 bolts and fuel pressure regulator assembly.

    5. B001GVOE03
      Text in Illustration
      *a O-ring

      Remove the O-ring from the fuel pressure regulator assembly.