FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type) INSTALLATION

PROCEDURE


  1. INSTALL FUEL SENDER GAUGE ASSEMBLY (for 5 Door)


    1. B001E5OC01
      *1 No. 1 Fuel Sub-Tank
      B001CHY Slide

      Set the fuel sender gauge assembly on the No. 1 fuel sub-tank. Then slide the fuel sender gauge assembly downward to install it.

    2. Connect the fuel sender gauge assembly connector.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY (for 3 Door)


    1. Install a new gasket and fuel sender gauge assembly with the 5 screws.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

    2. Connect the fuel sender gauge assembly connector and fuel pump connector.

  3. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (for 5 Door)

    Click here

  4. INSTALL REAR FLOOR SERVICE HOLE COVER (for 3 Door)


    1. Install the rear floor service hole cover with the 3 screws.

  5. INSTALL REAR FLOOR MAT SUPPORT PLATE (for 3 Door)

    Click here