FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type) REMOVAL

PROCEDURE


  1. REMOVE FUEL TANK VENT TUBE ASSEMBLY (for 5 Door)

    Click here

  2. REMOVE REAR FLOOR MAT SUPPORT PLATE (for 3 Door)

    Click here

  3. REMOVE REAR FLOOR SERVICE HOLE COVER (for 3 Door)

    Tech Tips

    Fold back the floor mat so that the rear floor service hole cover can be removed.


    1. B001GHR

      Remove the 3 screws and rear floor service hole cover.

  4. REMOVE FUEL SENDER GAUGE ASSEMBLY (for 5 Door)


    1. B001E1L

      Disconnect the fuel sender gauge assembly connector.

    2. B001EALC01
      B001CHY Slide

      Detach the claw and slide the fuel sender gauge assembly upward to remove it.

  5. REMOVE FUEL SENDER GAUGE ASSEMBLY (for 3 Door)


    1. B001CA8

      Disconnect the fuel sender gauge assembly connector and fuel tank ground connector.

    2. Remove the 5 screws and fuel sender gauge assembly.

    3. Remove the gasket from the fuel sender gauge assembly.