FUEL SENDER GAUGE ASSEMBLY(for Double Tank Type) INSTALLATION

PROCEDURE


  1. INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Main Tank)


    1. B001CGAC01
      B001CHY Slide

      Set the fuel sender gauge assembly on the fuel tank vent tube assembly. Then slide the fuel sender gauge downward to install it.

    2. Connect the fuel sender gauge assembly connector.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)


    1. B001GH7C01
      B001CHY Slide

      Set the fuel sender gauge assembly on the fuel gauge support. Then slide the fuel sender gauge assembly downward to install it.

    2. B001FHSC01
      *1 Lead Wire (Pink)
      *2 Lead Wire (Black)
      *3 Lead Wire (Green)

      Install the 3 lead wires with the 3 screws.

      Torque:
      2.0 N*m  { 20 kgf*cm, 18 in.*lbf }

      Note

      Be sure to install the lead wires in the correct locations according to their color as shown in the illustration.

  3. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (for Fuel Main Tank)

    Click here

  4. INSTALL FUEL TANK VENT TUBE ASSEMBLY (for Fuel Sub Tank)

    Click here