FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type) INSTALLATION

PROCEDURE


  1. INSTALL FUEL SENDER GAUGE ASSEMBLY (for 5 Door)


    1. A01XJ7CE01
      Text in Illustration
      *1 Fuel Sub-Tank
      B001CHY Slide

      Set the fuel sender gauge assembly on the fuel sub-tank. Then slide the fuel sender gauge assembly downward to install it.

    2. Connect the fuel sender gauge assembly connector.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY (for 3 Door)


    1. Install a new gasket and the fuel sender gauge assembly with the 5 screws.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }
    2. Connect the fuel sender gauge assembly connector and fuel tank ground connector.

  3. INSTALL FUEL TANK VENT TUBE ASSEMBLY (for 5 Door)

    Click here

  4. INSTALL REAR FLOOR SERVICE HOLE COVER (for 3 Door)


    1. Install the rear floor service hole cover with the 3 screws.

  5. INSTALL REAR FLOOR MAT SUPPORT PLATE (for 3 Door)

    Click here