FUEL PUMP(for Double Tank Type) REMOVAL

PROCEDURE


  1. REMOVE FUEL TANK SUB-ASSEMBLY

    Click here

  2. REMOVE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    1. A01XL5NE02
      Text in Illustration
      *a SST (Plate)
      *b SST (Claw)
      *c Insertion point

      Set the 4 claws and plate of SST on the retainer.

      SST
      09808-14030   ( 09808-01010, 09808-01030, 09808-01040 )

      Tech Tips

      Securely insert the ends of SST into the insertion points in the retainer.

    2. B001E7QE01

      Using SST, loosen the retainer.

      SST
      09808-14030

      Note


      • When the retainer is loosened, be careful as the fuel suction with pump and gauge tube assembly will spring upward from the force of the spring.

      • Remove any foreign matter around the fuel suction with pump and gauge tube assembly before this operation.

      Tech Tips

      Fit the tips of SST onto the ribs of the retainer.

    3. Remove the retainer.

    4. Remove the fuel suction with pump and gauge tube assembly from the fuel tank sub-assembly.

      Note

      Be careful not to bend the arm of the fuel sender gauge assembly.

    5. Remove the gasket from the fuel tank sub-assembly.