OIL PUMP REASSEMBLY

PROCEDURE

1. INSTALL OIL PUMP ROTOR SET

   
   
   1. 

      Text in Illustration

      *a	Alignment Mark

      Coat the oil pump rotor set with engine oil and place it into oil pump body with the alignment marks facing outward (oil pump cover side). Check that the oil pump rotor set revolves smoothly.

2. INSTALL OIL PUMP COVER

   
   

   1. Install the oil pump cover to the timing chain cover sub-assembly with the 2 bolts and 6 screws.

      Torque:

      for bolt

      8.9 N*m  { 91 kgf*cm, 79 in.*lbf }

      for screw

      10 N*m  { 105 kgf*cm, 8 ft.*lbf }

3. INSTALL OIL PUMP RELIEF VALVE

   
   

   1. Coat the oil pump relief valve with engine oil.

   2. Insert the oil pump relief valve and oil pump relief valve spring into the oil pump relief valve hole.

   3. Install a new gasket to the oil pump relief valve plug.

   4. Using a 27 mm socket wrench, install the oil pump relief valve plug.

      Torque:

      49 N*m  { 500 kgf*cm, 36 ft.*lbf }