OIL PRESSURE SWITCH INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

   
   

   1. Apply adhesive to 2 or 3 threads of the engine oil pressure switch assembly.

      Adhesive
      TOYOTA Genuine Adhesive 1344, Three Bond 1344 or equivalent

      Note

      Do not let adhesive adhere to the oil hole.

   2. Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

      Torque:

      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      Do not start the engine within 1 hour of installation.

   3. Connect the engine oil pressure switch assembly connector.

2. INSPECT FOR OIL LEAK

   Click here

3. INSPECT ENGINE OIL LEVEL

   Click here

4. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

5. INSTALL FRONT BUMPER COVER LOWER

   Click here