OIL LEVEL SENSOR INSTALLATION

PROCEDURE

1. INSTALL ENGINE OIL LEVEL SENSOR

   
   

   1. Install the engine oil level sensor to the oil pan sub-assembly with the 4 bolts.

      Torque:

      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

   2. Connect the engine oil level sensor connector.

2. INSTALL WIRING HARNESS CLAMP BRACKET (w/ Urea SCR System)

   
   

   1. Install the wiring harness clamp bracket with the bolt.

      Torque:

      13 N*m  { 131 kgf*cm, 9 ft.*lbf }

   2. Attach the 3 clamps to connect the wire harness.

3. ADD ENGINE OIL

   Click here

4. INSPECT FOR OIL LEAK

   Click here

5. INSPECT ENGINE OIL LEVEL

   Click here