OIL LEVEL SENSOR INSPECTION

PROCEDURE


  1. INSPECT ENGINE OIL LEVEL SENSOR


    1. B001ER2C01
      *a

      Component without harness connected

      (Engine Oil Level Sensor)
      *b Body ground
      *c On
      *d Off

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 - Body ground On Below 1 Ω
      1 - Body ground Off 10 kΩ or higher

      If the result is not as specified, replace the engine oil level sensor.