OIL LEVEL SENSOR REMOVAL

PROCEDURE


  1. REMOVE REAR ENGINE UNDER COVER ASSEMBLY

    Click here

  2. DRAIN ENGINE OIL

    Click here

  3. REMOVE WIRING HARNESS CLAMP BRACKET (w/ Urea SCR System)


    1. A01XIP2

      Detach the 3 clamps to disconnect the wire harness.

    2. B001D3M

      Remove the bolt and wiring harness clamp bracket.

  4. REMOVE ENGINE OIL LEVEL SENSOR


    1. Disconnect the engine oil level sensor connector.

    2. A01XEIE

      Remove the 4 bolts and engine oil level sensor from oil pan sub-assembly.