OIL LEVEL SENSOR REMOVAL

PROCEDURE


  1. REMOVE REAR ENGINE UNDER COVER ASSEMBLY

    Click here

  2. DRAIN ENGINE OIL

    Click here

  3. REMOVE WIRING HARNESS CLAMP BRACKET (w/ Urea SCR System)


    1. B001FUM

      Detach the 3 clamps to disconnect the wire harness.

    2. B001D3M

      Remove the bolt and wiring harness clamp bracket.

  4. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY

    Click here

  5. REMOVE ENGINE OIL LEVEL SENSOR


    1. B001DCD

      Disconnect the engine oil level sensor connector.

    2. B001GG1

      Remove the clip from the engine oil level sensor.

    3. B001FD1

      Remove the 2 nuts and 2 stud bolts, remove the oil level sensor bracket.

    4. B001DZ1

      Detach the clamp and remove the 2 bolts from the engine oil level sensor.