REAR SPOILER INSTALLATION


  1. INSTALL NO. 3 REAR SPOILER PROTECTOR


    1. Clean the rear spoiler.


      1. Remove any remaining double-sided tape from the rear spoiler.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Install 2 new No. 3 rear spoiler protectors.


      1. Remove the release paper from the 2 No. 3 rear spoiler protectors.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      2. Install the 2 No. 3 rear spoiler protectors as shown in the illustration.

        A01I4WTE01
        Standard Measurement
        Area Measurement Area Measurement
        A 1.0 mm (0.0394 in.) B 2.5 mm (0.0984 in.)

  2. INSTALL NO. 4 REAR SPOILER PROTECTOR


    1. Clean the rear spoiler.


      1. Remove any remaining double-sided tape from the rear spoiler.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Install 2 new No. 4 rear spoiler protectors.


      1. Remove the release paper from the 2 No. 4 rear spoiler protectors.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      2. Install the 2 No. 4 rear spoiler protectors as shown in the illustration.

        A01I4QVE01
        Standard Measurement
        Area Measurement Area Measurement
        A 1.0 mm (0.0394 in.) B 5.0 mm (0.197 in.)

  3. INSTALL NO. 5 REAR SPOILER PROTECTOR


    1. Clean the rear spoiler.


      1. Remove any remaining double-sided tape from the rear spoiler.

      2. Wipe off any tape adhesive residue with cleaner.

    2. Install a new No. 5 rear spoiler protector.


      1. Remove the release paper from the No. 5 rear spoiler protector.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      2. A01I57GE01

        Install the No. 5 rear spoiler protector as shown in the illustration.

        Standard Measurement
        Area Measurement
        A 1.0 mm (0.0394 in.)
        B 2.5 mm (0.0984 in.)

  4. INSTALL REAR SPOILER SUB-ASSEMBLY

    Tech Tips

    When installing the rear spoiler sub-assembly, heat the vehicle body and rear spoiler sub-assembly using a heat light.

    Heating Temperature
    Item Temperature
    Vehicle Body 40 to 60°C (104 to 140°F)
    Rear Spoiler 20 to 30°C (68 to 86°F)

    Note

    Do not heat the vehicle body, rear spoiler sub-assembly excessively.


    1. When replacing the rear spoiler with a new one:


      1. Install the 2 stud bolts to the rear spoiler.

    2. Install 2 new gaskets to the rear spoiler.

    3. Install 4 new clips to the rear spoiler.

    4. Clean the rear spoiler.


      1. Remove any remaining double-sided tape from the rear spoiler.

      2. Wipe off any tape adhesive residue with cleaner.

    5. Install 2 new No. 2 rear spoiler protectors.


      1. Remove the release paper from the 2 No. 2 rear spoiler protectors.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      2. Install the 2 No. 2 rear spoiler protectors.

    6. Install a new No. 1 rear spoiler protector.


      1. Remove the release paper from the No. 1 rear spoiler protector.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      2. Install the No. 1 rear spoiler protector as shown in the illustration.

        A01I419E01
        Standard Measurement
        Area Measurement - -
        A 2.5 mm (0.0984 in.) - -

    7. Clean the vehicle body surface.


      1. Using a heat light, heat the vehicle body surface.

      2. Remove any remaining double-sided tape from the vehicle body.

      3. Wipe off any tape adhesive residue with cleaner.

    8. Install the rear spoiler sub-assembly.


      1. Using a heat light, heat the vehicle body and rear spoiler sub-assembly.

      2. Remove the release paper from the rear spoiler sub-assembly.

        Tech Tips

        After removing the release paper, keep the exposed adhesive free from foreign matter.

      3. A01I5L0

        Engage the 4 clips.

      4. Install the rear spoiler sub-assembly with the 2 nuts.

        Torque:
        5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

  5. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. A01I5U8

      Install the luggage compartment door cover with the 13 clips.