REAR BUMPER REMOVAL


  1. REMOVE REAR BUMPER PLATE LH


    1. A01I32AE01
      Text in Illustration
      *a Hook
      A01I3GM Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws.

    2. Disengage the hook and remove the rear bumper plate LH.

  2. REMOVE REAR BUMPER PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE REAR BUMPER ASSEMBLY


    1. A01I5B4

      Apply protective tape around the rear bumper assembly as shown in the illustration.

      Text in Illustration
      A01I3GM Protective Tape
    2. A01I49Z

      Remove the 2 screws.

    3. A01I465

      Remove the 5 screws.

      Text in Illustration
      A01I3Q9 Screw
      A01I679 Clip

    4. Using a clip remover, remove the 4 clips.

    5. A01I3LM

      Remove the screw.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    6. A01I464E01

      Disengage the claw (A).

      Tech Tips

      Use the same procedure for the RH side and LH side.

    7. Using a screwdriver with its tip wrapped with protective tape, disengage the 6 claws (B) as shown in the illustration.

      Tech Tips

      Use the same procedure for the RH side and LH side.

    8. A01I525

      Disengage the 6 claws as shown in the illustration.

    9. w/ Intuitive Parking Assist System:


      1. Disconnect the connector.

    10. Remove the rear bumper assembly.