HORN INSTALLATION


  1. INSTALL LOW PITCHED HORN ASSEMBLY


    1. Install the low pitched horn assembly with the bolt.

      Torque:
      20 N*m  { 199 kgf*cm, 14 ft.*lbf }

    2. Connect the connector.

  2. INSTALL HIGH PITCHED HORN ASSEMBLY (w/o Side Turn Signal Light)


    1. Install the high pitched horn assembly with the bolt.

      Torque:
      20 N*m  { 199 kgf*cm, 14 ft.*lbf }

    2. Connect the connector.

  3. INSTALL SUPER LOW PITCHED HORN ASSEMBLY (w/ Side Turn Signal Light)


    1. Install the super low pitched horn assembly with the bolt.

      Torque:
      20 N*m  { 199 kgf*cm, 14 ft.*lbf }

    2. Connect the connector.

  4. INSTALL COOL AIR INTAKE DUCT SEAL


    1. Install the cool air intake duct seal with the 9 clips.