SIDE TURN SIGNAL LIGHT ASSEMBLY REMOVAL

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure described below is for the LH side.


  1. REMOVE OUTER MIRROR


    1. A01I61NE01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the area shown in the illustration.

    2. Push the upper part of the mirror surface and tilt it.

    3. Using a moulding remover, disengage the 2 claws at the lower part of the outer mirror as shown in the illustration.

    4. A01I4XIE01
      Text in Illustration
      *a Protective Tape

      Apply protective tape to the area shown in the illustration.

    5. Push the lower part of the mirror surface and tilt it.

    6. Using a moulding remover, disengage the 2 claws at the upper part of the outer mirror as shown in the illustration.

    7. A01I2XG

      Disconnect the 2 connectors and remove the outer mirror.

  2. REMOVE OUTER MIRROR COVER


    1. A01I64G

      Remove the 3 screws.

    2. A01I5FB

      Disengage the clamp.

    3. Disconnect the connector and remove the mirror actuator.

    4. A01I38V

      Disengage the 7 claws and remove the outer mirror cover.

  3. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY


    1. A01I4GN

      Disengage the 2 claws.

    2. Disconnect the connector and remove the side turn signal light assembly.