LIGHTING SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (EXT)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.


    1. Customizing with the Techstream


      1. Connect the Techstream to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the Techstream on.

      4. Enter the following menus: Body Electrical / Main Body / Utility / Customize / Light Control.

      5. Select the setting by referring to the table below.

        Light Control
        Display Default Content Setting Relevant ECU
        Disp Ex ON Sen NORMAL Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*A LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2 Main Body ECU (Multiplex Network Body ECU)
        Disp Ex OFF Sen NORMAL Changes the ambient brightness level required to cancel the dimming of the lights such as the indicator lights of the combination meter, A/C indicator light and clock.*B LIGHT2, LIGHT1, NORMAL, DARK1 or DARK2
        Light Auto OFF Delay*3 30 s Keeps the headlights on for a certain period of time after turning the power switch off and closing all doors with the low beam headlights on. OFF, 30 s, 60 s or 90 s
        Response Time*1 Normal Changes the delay timing of lighting the taillights when going into a tunnel when the light control switch is in the AUTO position. Normal or Long
        Sensitivity Normal Adjusts the sensitivity of the automatic light control system.*C Light2, Light1, Normal, Dark1 or Dark2
        DRL Function*2 ON ON/OFF of the DRL function ON or OFF

        • *1: w/ Side Turn Signal Light

        • *2: Headlight dimmer switch with DRL OFF function.

        • *3: w/o Side Turn Signal Light

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *A
        Brightness level required to dim the lights A01I2PW
        Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2
        *B
        Brightness level required to cancel the dimming of the lights A01I2PW
        Setting DARK2 DARK1 NORMAL LIGHT1 LIGHT2
        *C
        Sensitivity of the automatic light control system A01I2PW
        Setting Dark2 Dark1 Normal Light1 Light2

    2. Customizing with the multi-display (w/ Navigation System or w/ Audio and Visual System (w/o DVD Player))


      1. Turn the power switch on (IG).

      2. Enter the following menus: APPS / Setup / Vehicle / Vehicle Customization / Light Settings. (w/ Navigation System)

      3. Enter the following menus: SETUP / Vehicle / Vehicle Customization / Light Settings. (w/ Audio and Visual System (w/o DVD Player))

      4. Select the setting by referring to the table below.

        Light Settings
        Display Default Content Setting Relevant ECU
        Headlamps-On Sensitivity 0 Adjusts the sensitivity of the automatic light control system.*A -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
        Headlamps Auto-Off Timer 30 sec. Keeps the headlights on for a certain period of time after turning the power switch off and closing all doors with the low beam headlights on. Off, 30 sec., 60 sec. or 90 sec.
        Daytime Running Lights* On ON/OFF of the DRL function On or Off

        • *: Headlight dimmer switch with DRL OFF function.

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *A
        Sensitivity of the automatic light control system A01I2PW
        Setting -2 -1 0 +1 +2

    3. Customizing with the multi-display (w/ Audio and Visual System (w/ DVD Player))


      1. Turn the power switch on (IG).

      2. Enter the following menus: SETUP / Vehicle / Vehicle customization / Light settings.

      3. Select the setting by referring to the table below.

        Light settings
        Display Default Content Setting Relevant ECU
        Light sensor sensitivity 0 Adjusts the sensitivity of the automatic light control system.*A -2, -1, 0, +1 or +2 Main Body ECU (Multiplex Network Body ECU)
        Daytime Running Lights On ON/OFF of the DRL function On or Off

        Tech Tips

        The sensitivity adjustment may be difficult to confirm. Check by driving the customer's vehicle.

        *A
        Sensitivity of the automatic light control system A01I2PW
        Setting -2 -1 0 +1 +2