WIPER SWITCH INSPECTION


  1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY


    1. A01I4STE29
      Text in Illustration
      *a

      Component without harness connected

      (Windshield Wiper Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Front Wiper Switch
      Tester Connection Switch Condition Specified Condition
      I32-1 (+S) - I32-3 (+1) OFF Below 1 Ω
      INT
      I32-2 (+B) - I32-3 (+1) MIST
      LO
      I32-2 (+B) - I32-4 (+2) HI
      Front Washer Switch
      Tester Connection Switch Condition Specified Condition
      I31-4 (EW) - I31-7 (WF) ON Below 1 Ω
      OFF 10 kΩ or higher

      If the result is not as specified, replace the windshield wiper switch assembly.