LUGGAGE DOOR HINGE TORSION BAR REMOVAL

Note

When the luggage door hinge torsion bars are removed, their tension will be lost, causing the luggage door to slam close. Therefore, hold the luggage door securely when opening or closing it.


  1. REMOVE NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. A01I50M

      Disconnect the connector.

    2. Disengage the clamp and remove the No. 3 indoor electrical key antenna assembly.

      Note

      Be careful when removing the indoor electrical key antenna assembly. If the antenna is dropped, replace it with a new one.

  2. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH


    1. A01I34I

      Disengage the 2 claws as shown in the illustration.

    2. A01I30H

      Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.

    3. A01I2ATE01

      Using SST, disconnect the luggage door hinge torsion bar RH from the left side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    4. A01I55Q

      Remove the luggage door hinge torsion bar RH from the right side luggage door hinge as shown in the illustration.

  3. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH


    1. A01I361

      Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.

    2. A01I2ITE01

      Using SST, disconnect the luggage door hinge torsion bar LH from the right side of the vehicle body as shown in the illustration.

      SST
      09804-24010
    3. A01I3IS

      Remove the luggage door hinge torsion bar LH from the left side luggage door hinge as shown in the illustration.

  4. REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. A01I3LQ

      Remove the luggage compartment door torsion bar support as shown in the illustration.

      Note

      Make sure to replace the luggage compartment door torsion bar support with a new one.