SLIDING ROOF HOUSING REMOVAL


  1. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH

    Click here

  2. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  3. REMOVE SLIDING ROOF SIDE GARNISH LH


    1. A01I3GQ

      Disengage the 2 claws and remove the sliding roof side garnish LH.

  4. REMOVE SLIDING ROOF SIDE GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE SLIDING ROOF GLASS SUB-ASSEMBLY


    1. A01I2AB

      Using a T25 "TORX" socket wrench, remove the 4 screws and sliding roof glass sub-assembly.

      Note

      To prevent the sliding roof glass and sliding roof drive gear from being displaced, fully close the sliding roof glass (sliding roof drive cable), and then remove the sliding roof glass sub-assembly.

  6. REMOVE SLIDING ROOF WEATHERSTRIP


    1. Remove the sliding roof weatherstrip from the sliding roof panel sub-assembly.

  7. REMOVE REAR NO. 2 SIDE RAIL SPACER LH


    1. A01I3QVE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disengage the 2 claws and remove the rear No. 2 side rail spacer LH.

      Tech Tips

      Tape the screwdriver tip before use.

  8. REMOVE REAR NO. 2 SIDE RAIL SPACER RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. REMOVE SLIDING ROOF HOUSING SUB-ASSEMBLY


    1. A01I4W1

      for Clamp Type:


      1. Disengage the claw and disconnect the sliding roof drain hose.

        Tech Tips

        Use the same procedure for the other 3 sliding roof drain hoses.

    2. A01I5BM

      for Clip Type:


      1. Expand the clip and disconnect the sliding roof drain hose.

        Tech Tips

        Use the same procedure for the other 3 sliding roof drain hoses.

    3. Loosen the 8 bolts of the brackets.

      A01I41PE01
      Text in Illustration
      *1 Bracket - -

    4. Remove the 8 bolts, 8 nuts and sliding roof housing sub-assembly.

      A01I2WC