REAR POWER WINDOW SWITCH INSPECTION


  1. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY LH


    1. A01I31JE01
      Text in Illustration
      *a

      Component without harness connected

      (Power Window Regulator Switch Assembly (for Rear LH Door))

      Check the switch function.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 - 7 Up Below 1 Ω
        1 - 4 Up Below 1 Ω
        3 - 7 Off Below 1 Ω
        1 - 4 Off Below 1 Ω
        3 - 7 Down Below 1 Ω
        1 - 2 Down Below 1 Ω

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear LH door).

    2. A01I31JE01
      Text in Illustration
      *a

      Component without harness connected

      (Power Window Regulator Switch Assembly (for Rear LH Door))

      Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

        OK
        Auxiliary battery Connection Specified Condition

        Auxiliary battery positive (+) → 6

        Auxiliary battery negative (-) → 5

        		 LED illuminates

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear LH door).

  2. INSPECT REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY RH


    1. A01I31JE01
      Text in Illustration
      *a

      Component without harness connected

      (Power Window Regulator Switch Assembly (for Rear RH Door))

      Check the switch function.


      1. Measure the resistance when the switch is operated according to the value(s) in the table below.

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        2 - 7 Up Below 1 Ω
        1 - 4 Up Below 1 Ω
        3 - 7 Off Below 1 Ω
        1 - 4 Off Below 1 Ω
        3 - 7 Down Below 1 Ω
        1 - 2 Down Below 1 Ω

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear RH door).

    2. A01I31JE01
      Text in Illustration
      *a

      Component without harness connected

      (Power Window Regulator Switch Assembly (for Rear RH Door))

      Check that the LED illuminates.


      1. Apply auxiliary battery voltage to the rear power window regulator switch assembly and check that the LED illuminates.

        OK
        Auxiliary battery Connection Specified Condition

        Auxiliary battery positive (+) → 6

        Auxiliary battery negative (-) → 5

        		 LED illuminates

        If the result is not as specified, replace the rear power window regulator switch assembly (for rear RH door).