WIRELESS CHARGING SYSTEM TERMINALS OF ECU


  1. UPPER CONSOLE PANEL SUB-ASSEMBLY

    A01I3GHE02
    Tester Connection Wiring Color Terminal Description Condition Specified Condition
    I179-1 (ACC) - I179-5 (PGND) GR - W-B Power source (ACC) Power switch on (ACC) 11 to 14 V
    Power switch off Below 1 V
    I179-2 (ACC) - I179-4 (GND1) GR - W-B Power source (ACC) Power switch on (ACC) 11 to 14 V
    Power switch off Below 1 V
    I179-3 (ILL+) - Body ground G - Body ground Illumination signal Light control switch in off position Below 1 V
    Power switch off, light control switch in tail or head position 11 to 14 V
    I179-4 (GND1) - Body ground W-B - Body ground Ground Always Below 1 V
    I179-5 (PGND) - Body ground W-B - Body ground Ground Always Below 1 V
    I179-8 (ILL-) - Body ground SB - Body ground Illumination (rheostat) signal Light control switch off Below 1 V
    Light control switch in tail or head position Pulse generation
    I179-9 (TAIL) - I179-5 (PGND) G - W-B Illumination signal Light control switch off Below 1 V
    Power switch off, light control switch in tail or head position 11 to 14 V
    I179-10 (DIS) - Body ground L - Body ground Smart key system status signal For 1500 ms after turning power switch from off to on (IG)*1 4.4 to 6.5 V
    Being charged Below 1 V
    Charging suspended due to smart key system status*2 4.4 to 6.5 V

    • *1: The upper console panel sub-assembly checks the status signal for 1500 ms when the power switch is turned from off to on (IG). If a status signal voltage of less than 1 V continues for 400 ms or more during the check, the upper console panel sub-assembly judges that the status signal is interrupted, blinks the indicators and stops the operation until the power switch is turned off then on (IG) again.

    • *2: For the status of the smart key system when charging is stopped temporarily, refer to System Description Click here.