PTC HEATER ASSEMBLY INSTALLATION


  1. INSTALL QUICK HEATER ASSEMBLY


    1. A01I46Z

      Insert the quick heater assembly as shown in the illustration.

    2. Install the 2 screws.

    3. Engage the 4 clamps.

    4. Install the quick heater assembly with the bolt.

      Torque:
      20 N*m  { 199 kgf*cm, 14 ft.*lbf }

    5. Connect the quick heater connector.

  2. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY


    1. A01I3MU

      Engage the 2 claws and guide to install the No. 1 air duct sub-assembly as shown in the illustration.

  3. INSTALL FLOOR CARPET BRACKET RH


    1. Engage the 2 guides.

    2. Install the floor carpet bracket RH with the 2 clips.

  4. INSTALL SHIFT LEVER SUPPORT

    Click here

  5. INSTALL RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type)

    Click here

  6. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Navigation Receiver Type)

    Click here

  7. INSTALL FRONT SEAT ASSEMBLY LH (for Manual Seat)

    Click here

  8. INSTALL FRONT SEAT ASSEMBLY LH (for Power Seat)

    Click here

  9. INSTALL FRONT SEAT ASSEMBLY RH (for Manual Seat)

    Tech Tips

    Use the same procedure as for the LH side.

  10. INSTALL FRONT SEAT ASSEMBLY RH (for Power Seat)

    Tech Tips

    Use the same procedure as for the LH side.