PTC HEATER ASSEMBLY INSPECTION


  1. INSPECT QUICK HEATER ASSEMBLY


    1. A01I5EIE02
      Text in Illustration
      *a

      Component without harness connected

      (Quick Heater Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      I41-1(B) - a1-1(E) Always Below 1 Ω
      I41-2(B) - a1-1(E) Always Below 1 Ω

      • If the result is not as specified, replace the quick heater assembly.