PTC HEATER ASSEMBLY REMOVAL


  1. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)

    Click here

  2. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)

    Click here

  3. REMOVE FRONT SEAT ASSEMBLY RH (for Manual Seat)

    Tech Tips

    Use the same procedure as for the LH side.

  4. REMOVE FRONT SEAT ASSEMBLY RH (for Power Seat)

    Tech Tips

    Use the same procedure as for the LH side.

  5. REMOVE RADIO RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Radio and Display Type)

    Click here

  6. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY (for Navigation Receiver Type)

    Click here

  7. REMOVE SHIFT LEVER SUPPORT

    Click here

  8. REMOVE FLOOR CARPET BRACKET RH


    1. A01I4Z3

      Remove the 2 clips.

    2. Disengage the 2 guides to remove the floor carpet bracket RH.

  9. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY


    1. A01I2QU

      Disengage the 2 claws and guide, and remove the No. 1 air duct sub-assembly as shown in the illustration.

  10. REMOVE QUICK HEATER ASSEMBLY


    1. A01I3QF

      Disconnect the quick heater connector.

    2. Remove the bolt.

    3. Disengage the 4 clamps.

    4. A01I4OP

      Remove the 2 screws.

    5. A01I406

      Remove the quick heater assembly as shown in the illustration.