ROOM TEMPERATURE SENSOR INSTALLATION


  1. INSTALL ROOM TEMPERATURE SENSOR (COOLER THERMISTOR)


    1. Connect the connector and cooler thermistor hose.

    2. A01I294

      Engage the 2 claws to install the room temperature sensor (cooler thermistor) as shown in the illustration.

  2. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL ASSEMBLY


    1. Engage the 4 claws, 9 clips and 3 guides.

    2. Install the lower No. 1 instrument panel finish panel assembly with the bolt <B> and screw <C> or <D>.

  3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.

  4. INSTALL INSTRUMENT SIDE PANEL LH


    1. Engage the 3 guides.

    2. A01I4VL

      Engage the 4 claws to install the instrument side panel LH as shown in the illustration.

  5. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH


    1. A01I4EUE01
      Text in Illustration
      *1 Alignment Mark (Yellow)

      Align the alignment mark (Yellow) on the weatherstrip with the protruding portion on the body indicated by the arrow in the illustration, and install the front door opening trim weatherstrip LH.

      Note

      After installation, check that the corners fit correctly.

  6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH


    1. A01I4EE

      Insert the 2 clips in the direction indicated by the arrows shown in the illustration to engage them.

    2. Install the cowl side trim sub-assembly LH with the clip.

  7. INSTALL FRONT DOOR SCUFF PLATE LH


    1. Engage the 10 claws to install the front door scuff plate LH.