PRE-COLLISION SYSTEM WARNING BUZZER INSPECTION


  1. INSPECT SKID CONTROL BUZZER ASSEMBLY


    1. A01I35AE01
      Text in Illustration
      *a

      Component without harness connected

      (Skid Control Buzzer Assembly)

      Make sure that there is no looseness at the locking part and the connecting part of the connector.

    2. Disconnect the skid control buzzer assembly connector.

    3. Check both the connector case and the terminal for deformation and corrosion.

      OK
      No deformation or corrosion.

    4. Connect a positive (+) lead from the battery to terminal 1, and a negative (-) lead to terminal 2 of the skid control buzzer assembly, and then check that the buzzer sounds.

      OK
      The skid control buzzer assembly sounds.