FRONT SEAT ASSEMBLY (for Power Seat) DISASSEMBLY


  1. REMOVE SEAT ADJUSTER COVER CAP


    1. A01I5Q6

      Remove the 2 seat adjuster cover caps.

  2. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB


    1. A01I42J

      Using a moulding remover, disengage the 4 claws to remove the slide and vertical power seat switch knob.

  3. REMOVE RECLINING POWER SEAT SWITCH KNOB


    1. A01I2S6

      Using a moulding remover, disengage the 4 claws to remove the reclining power seat switch knob.

  4. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER


    1. A01I47R

      Disconnect the 2 rubber bands of the separate type front seatback cover.

  5. REMOVE FRONT SEAT CUSHION SHIELD


    1. A01I5VS

      Remove the screw.

    2. Disengage the 2 claws to remove the front seat cushion shield.

    3. A01I59S

      Disengage the wire harness clamp.

    4. Disconnect the front power seat switch connector.

    5. for Driver Side:


      1. A01I37I

        Disengage 4 claws to remove the front lumbar power seat switch from the front seat cushion shield.

  6. REMOVE FRONT POWER SEAT SWITCH


    1. A01I5Y8

      Remove the 3 screws and front power seat switch from the front seat cushion shield.

  7. REMOVE FRONT LUMBAR POWER SEAT SWITCH (for Driver Side)


    1. A01I3O1

      Disconnect the connector to remove the front lumbar power seat switch.

  8. REMOVE FRONT SEAT INNER CUSHION SHIELD


    1. A01I5SA

      Remove the 2 screws and front seat inner cushion shield.

  9. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Seat)


    1. Disengage each clamp under the front seat assembly.

    2. A01I36C

      Disengage the clamp.

    3. Remove the nut and front seat inner belt assembly LH.

  10. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Seat)


    1. A01I62A

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the nut and front seat inner belt assembly RH.

  11. REMOVE LOWER SEAT TRACK RAIL


    1. Remove the lower seat track rail.

  12. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD


    1. A01I4ADE01

      Disconnect the connector (A).

    2. Disengage the clamp (B).

    3. Disengage the claw (D) and 3 clamps (C) to separate the front seat airbag assembly wire harness.

    4. w/ Seat Heater System:


      1. Disconnect the connector (E).

      2. Disengage the clamp (F).

    5. for Driver Side:


      1. A01I3B4

        Separate the separate type front seat cushion cover.

    6. for Front Passenger Side:


      1. A01I3SX

        Separate the separate type front seat cushion cover.

    7. A01I2C6

      Disengage the 4 hooks.

    8. A01I3PV

      Disengage each hook and remove the separate type front seat cushion cover with pad.

  13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER


    1. A01I3VO

      Remove the 12 hog rings and the separate type front seat cushion cover from the separate type front seat cushion pad.

  14. REMOVE FRONT SEAT CUSHION HEATER ASSEMBLY (w/ Seat Heater System)


    1. A01I2UH

      Remove the 20 tag pins and the front seat cushion heater assembly from the separate type front seat cushion cover.

  15. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD


    1. A01I33L

      Disengage the hook.

    2. A01I3J1

      Disengage the 2 fasteners.

    3. A01I4ZG

      Turn back the separate type front seatback cover.

    4. A01I5ZQ

      Disengage the 2 hooks.


      1. Remove the 4 clips.

      2. Slide each hook to disengage them.

    5. A01I5B3

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01I2IL

      Remove the separate type front seatback cover with pad.

  16. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A01I4XZ

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly or separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.

  17. REMOVE SEPARATE TYPE FRONT SEATBACK COVER


    1. A01I52D

      Remove the 2 hog rings.

    2. Disengage the 2 fasteners to remove the separate type front seatback cover from the separate type front seatback pad.

  18. REMOVE FRONT SEATBACK HEATER ASSEMBLY (w/ Seat Heater System)


    1. A01I51Z

      Remove the 8 tag pins and the front seatback heater assembly from the separate type front seatback cover.

  19. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Driver Side)


    1. A01I4MI

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the 2 claws to remove the front seat lower cushion shield LH.

  20. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Driver Side)


    1. A01I34Y

      Remove the screw.

    2. Disengage the hook as shown in the illustration.

    3. Disengage the 2 claws to remove the front seat lower cushion shield RH.

  21. REMOVE FRONT SEAT LOWER CUSHION SHIELD LH (for Front Passenger Side)


    1. A01I3AC

      Disengage the 2 claws to remove the front seat lower cushion shield LH.

  22. REMOVE FRONT SEAT LOWER CUSHION SHIELD RH (for Front Passenger Side)


    1. A01I2OF

      Disengage the 2 claws to remove the front seat lower cushion shield RH.

  23. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)


    1. A01I5HS

      Disconnect the connector.

    2. Disengage the clamp and remove the seat heater control sub-assembly.

  24. REMOVE OCCUPANT DETECTION ECU (for Front Passenger Side)


    1. A01I4U0E01
      Text in Illustration
      *1 Protective Tape

      Disconnect the 2 connectors.

    2. Using a screwdriver with the tip wrapped with protective tape, disengage the claw and remove the occupant detection ECU.

  25. REMOVE FRONT SEAT WIRE


    1. Disconnect each connector and disengage each wire harness clamp to remove the front seat wire.

  26. REMOVE FRONT NO. 2 SEAT WIRE


    1. Disconnect each connector and disengage each wire harness clamp to remove the front No. 2 seat wire.

  27. REMOVE FRONT UPPER SEAT TRACK COVER LH


    1. A01I4SM

      Disengage the 2 claws to remove the front upper seat track cover LH.

  28. REMOVE FRONT UPPER SEAT TRACK COVER RH


    1. A01I2E1

      Disengage the 2 claws to remove the front upper seat track cover RH.

  29. REMOVE REAR UPPER SEAT TRACK COVER LH (for Front Passenger Side)


    1. A01I385

      Disengage the 2 claws to remove the rear upper seat track cover LH.

  30. REMOVE REAR UPPER SEAT TRACK COVER RH (for Front Passenger Side)


    1. A01I5IE

      Disengage the 2 claws to remove the rear upper seat track cover RH.

  31. REMOVE FRONT SEAT CUSHION PANEL SUB-ASSEMBLY (for Driver Side)


    1. A01I2M9

      Remove the 4 bolts and front seat cushion panel sub-assembly.

  32. REMOVE FRONT SEATBACK FRAME SUB-ASSEMBLY


    1. A01I5CY

      Remove the 4 bolts and the front seatback frame sub-assembly.

  33. REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY (for Driver Side)


    1. A01I3V7

      Disconnect the connector.

    2. Disengage the 4 claws.

    3. Disengage the 2 guides to remove the lumbar support adjuster assembly.

    4. Remove the 2 front seatback hooks from the lumbar support adjuster assembly.

  34. REMOVE SEPARATE TYPE FRONT SEATBACK SPRING ASSEMBLY (for Front Passenger Side)


    1. A01I5QJ

      Disengage the 4 claws.

    2. Disengage the 2 guides to remove the separate type front seatback spring assembly.

    3. Remove the 2 front seatback hooks from the separate type front seatback spring assembly.

  35. REMOVE SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY


    1. A01I4IF

      Remove the separate type front seat cushion spring assembly.