FRONT SEAT SIDE AIRBAG ASSEMBLY REMOVAL

CAUTION:


  • Be sure to read Precaution thoroughly before servicing Click here.

  • Wear protective gloves. Sharp areas on the seat frame and adjuster may injure your hands.

  • If the side airbag was deployed, replace the front seat airbag assembly, front seatback frame sub-assembly or separate type front seatback spring assembly, separate type front seatback cover and separate type front seatback pad with the necessary parts in accordance with the extent of the collision damage.

    for Manual Seat: Click here

    for Power Seat: Click here

Tech Tips


  • Use the same procedure for the RH side and LH side.

  • The following procedure is for the LH side.


  1. REMOVE FRONT SEAT ASSEMBLY (for Manual Seat)

    Click here

  2. REMOVE FRONT SEAT ASSEMBLY (for Power Seat)

    Click here

  3. DISCONNECT AIRBAG WIRE HARNESS (for Manual Seat)


    1. A01I434

      Disconnect the 2 rubber bands of the separate type front seatback cover.

    2. A01I4CA

      Disengage the claw and 3 clamps to disconnect the airbag wire harness.

  4. DISCONNECT AIRBAG WIRE HARNESS (for Power Seat)


    1. A01I47R

      Disconnect the 2 rubber bands of the separate type front seatback cover.

    2. A01I4ADE01

      Disconnect the connector (A).

    3. Disengage the clamp (B).

    4. Disengage the claw (D) and 3 clamps (C) to disconnect the airbag wire harness.

    5. w/ Seat Heater System:


      1. Disconnect the connector (E).

      2. Disengage the clamp (F).

  5. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Manual Seat)


    1. A01I53O

      Disengage the hook.

    2. A01I4O9

      Disengage the 2 fasteners.

    3. A01I4VD

      Turn back the separate type front seatback cover.

    4. A01I2WB

      Disengage the 2 hooks.

    5. A01I3DW

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01I3SJ

      Remove the separate type front seatback cover with pad.

  6. REMOVE SEPARATE TYPE FRONT SEATBACK COVER WITH PAD (for Power Seat)


    1. A01I33L

      Disengage the hook.

    2. A01I3J1

      Disengage the 2 fasteners.

    3. A01I4ZG

      Turn back the separate type front seatback cover.

    4. A01I5ZQ

      Disengage the 2 hooks.


      1. Remove the 4 clips.

      2. Slide each hook to disengage them.

    5. A01I5B3

      Disengage the 4 claws and remove the 2 front seat headrest supports.

    6. A01I2IL

      Remove the separate type front seatback cover with pad.

  7. REMOVE FRONT SEAT AIRBAG ASSEMBLY


    1. A01I4XZ

      Disengage the 2 clamps.

    2. Remove the 2 nuts and the front seat airbag assembly.

      CAUTION:


      • The nuts must not be reused.

      • Make sure that the front seatback frame sub-assembly or separate type front seatback spring assembly is not deformed. If it is, replace it with a new one.