METER / GAUGE SYSTEM CUSTOMIZE PARAMETERS


  1. CUSTOMIZE METER / GAUGE SYSTEM


    1. Customizing with the Techstream


      1. Connect the Techstream to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the Techstream on.

      4. Enter the following menus: Customize Setting / Warning or Display.

      5. Select the setting by referring to the table below.

        Note


        • Record the current settings before customizing.

        Warning
        Tester Display Default Content Setting Relevant ECU
        Key Remind Sound Slow Function to change the frequency of the key reminder warning buzzer Fast, Normal, Slow Combination meter assembly
        Lane Change Flashing Times Setting 3 Function to change the lane change flashing times OFF, 3, 4, 5, 6, 7 Combination meter assembly
        Display
        Tester Display Default Content Setting Relevant ECU
        ODO Display Time After IG OFF Setting 30s Function to change the odometer display time after the power switch is turned off OFF, 30s, 60s, 600s Combination meter assembly