LIGHTING SYSTEM CUSTOMIZE PARAMETERS

CUSTOMIZE LIGHTING SYSTEM (INT)

1. Customizing using the Techstream

   Tech Tips

   The following items can be customized.

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Be sure to make a note of the current settings before customizing.

   • When troubleshooting a function, first make sure that the function is set to the default setting.

   
   

   1. Connect the Techstream to the DLC3.

   2. Turn the power switch on (IG).

   3. Turn the Techstream on.

   4. Enter the following menus: Customize Setting / Illuminated Entry.

   5. Select the setting by referring to the table below.

      Illuminated Entry

      Tester Display	Default	Content	Setting	Relevant ECU
      Lighting Time	15 s	Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the power switch from off to on (ACC) or on (IG).)	7.5 s, 15 s or 30 s	Main body ECU (Multiplex network body ECU)
      I/L when ACC OFF	ON	Lights up the power switch illumination, personal light*1 and rear interior light when the power switch is turned from on (ACC) or on (IG) to off.	ON or OFF
      I/L ON W/Door Key Unlock	ON	Lights up the power switch illumination, personal light*1 and rear interior light when doors are unlocked using a mechanical key or door control transmitter.	ON or OFF
      Room Light when Aprchd	ON	Lights up the power switch illumination, personal light*1 and rear interior light when a key enters any actuation area around the doors.	ON or OFF
      Interior Light Control	ON	Lights up the power switch illumination, personal light*1 and rear interior light when the illuminated entry function is operating.	ON or OFF

      
      

      • *1: w/ Sliding Roof

2. Customizing using the multi-display (w/ Navigation System or w/ Audio and Visual System (w/o DVD Player))

   
   

   1. Turn the power switch on (IG).

   2. Enter the following menus: APPS / Setup / Vehicle / Vehicle Customization / Lights Settings. (w/ Navigation System)

   3. Enter the following menus: SETUP / Vehicle / Vehicle Customization / Lights Settings. (w/ Audio and Visual System (w/o DVD Player))

   4. Select the setting by referring to the table below:

      Lights Settings

      Display	Default	Content	Setting	Relevant ECU
      Interior Lights Off Timer	15 sec.	Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the power switch from off to on (ACC) or on (IG).)	Off, 7.5 sec., 15 sec., or 30 sec.	Main body ECU (Multiplex network body ECU)

3. Customizing using the multi-display (w/ Audio and Visual System (w/ DVD Player))

   
   

   1. Turn the power switch on (IG).

   2. Enter the following menus: SETUP / Vehicle / Vehicle customization / Lights settings.

   3. Select the setting by referring to the table below:

      Lights settings

      Display	Default	Content	Setting	Relevant ECU
      Interior lights off timer	15 sec.	Changes the lighting time after closing all of the doors. (It will fade out immediately in case of turning the power switch from off to on (ACC) or on (IG).)	Off, 7.5 sec., 15 sec., or 30 sec.	Main body ECU (Multiplex network body ECU)