ELECTRICAL KEY OSCILLATOR (for Front Floor) REMOVAL


  1. REMOVE UPPER CONSOLE BOX SUB-ASSEMBLY


    1. A01I2WR

      Disengage the 4 clips.

    2. Disconnect each connector and remove the upper console box sub-assembly.

  2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01I34L

      Disengage the 2 claws as shown in the illustration.

    2. A01I4BY

      Turn the shift lever knob sub-assembly counterclockwise and remove the shift lever knob sub-assembly.

  3. REMOVE REAR CONSOLE UPPER PANEL SUB-ASSEMBLY


    1. Move the shift lever to N.

    2. A01I3WI

      Disconnect the connector.

    3. Remove the 2 screws <C> or <D>.

    4. A01I40Y

      Disengage the 6 clips and remove the rear console upper panel sub-assembly.

  4. REMOVE NO. 4 CONSOLE BOX DUCT (w/ Rear Register Duct)


    1. A01I3UF

      Disengage the claw and remove the No. 4 console box duct.

  5. REMOVE NO. 1 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY


    1. A01I48D

      Disengage the clamp.

    2. Remove the bolt.

    3. Disconnect the connector and remove the No. 1 indoor electrical key antenna assembly.

      Note

      Be careful when removing the indoor electrical key antenna assembly. If the antenna is dropped, replace it with a new one.