SMART KEY SYSTEM (for Start Function) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE SMART KEY SYSTEM (for Start Function)

    Tech Tips

    The following items can be customized.

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Record the current settings before customizing.


    1. Customizing with the Techstream


      1. Connect the Techstream to the DLC3.

      2. Turn the power switch on (IG).

      3. Turn the Techstream on.

      4. Enter the following menus: Customize Setting / Smart Key/Access or Warning.

      5. Select the setting by referring to the table below.

        Smart Key/Access
        Display Default Content Setting Relevant ECU

        Ignition Available Area

        (Entry ignition available area)

        All Function that sets the area that the key must be in before the power switch can be operated. Front or All Certification ECU (smart key ECU assembly)
        Auto Entry Cancel SW* OFF Function that enables or disables the smart key system. OFF or ON Certification ECU (smart key ECU assembly)
        Engine Start Indicator ON Function that turns the smart warning light on the combination meter assembly on or off. OFF or ON Certification ECU (smart key ECU assembly)

        • *: w/ Side Turn Signal Light

        Warning
        Display Default Content Setting Relevant ECU
        Key Low Battery Warning (Warn when key battery becomes weak) ON Enables or disables the sounding of the buzzer when the transmitter battery is low and the power switch is turned off after being on (IG) for 20 minutes or more. OFF or ON Certification ECU (smart key ECU assembly)
    2. Customizing with the multi-display (for Audio and Visual System (w/ DVD Player))


      1. Turn the power switch on (IG).

      2. Enter the following menus: SETUP / Vehicle / Vehicle customization / Door lock settings.

      3. Select the setting by referring to the table below.

        Display Default Content Setting Relevant ECU
        Entry and start system On Function that enables or disables the smart key system. On or Off Certification ECU (smart key ECU assembly)
    3. Entry cancel function (manual operation)

      Tech Tips

      While the smart key system is canceled, it is possible to lock and unlock the doors with the wireless operation, and the start system can be operated by holding the electrical key transmitter sub-assembly near the power switch.


      1. The following functions are disabled when the smart key system is canceled.


        1. Entry unlock/lock functions

        2. Entry luggage compartment door open function

        3. Push-button start function

        4. Key lock-in prevention function

        5. Entry warning functions

      2. When canceling the system through manual operation:


        1. Make sure the following conditions are met:


          • The power switch is off.

          • The driver door is closed.

          • The driver door is unlocked.

        2. Press the unlock button of the electrical key transmitter sub-assembly.

        3. Open the driver door within 5 seconds of completing the step above (driver door: close condition → opened).

        4. With the driver door open, press the unlock button of the electrical key transmitter sub-assembly 2 times within 5 seconds of completing the step above.

          Note

          If the driver door is closed before or while pressing the unlock button, the entry cancel setting mode will end.

        5. Close and open the driver door twice completing the above step (driver door: open condition → closed → opened → closed → opened).

        6. With the driver door open, press the unlock button of the electrical key transmitter sub-assembly 2 times completing the step above.

          Note

          If the driver door is closed before or while pressing the unlock button, the entry cancel setting mode will end.

        7. Close and open the driver door completing the step above (driver door: open condition → closed → opened).

        8. Close the driver door within 5 seconds of completing the above step.

        9. Check that the wireless buzzer sounds twice (short beeps) to confirm that the smart key system has been canceled.

        Tech Tips

        Finish the step 5 to 7 within 30 seconds.

      3. Perform the following procedure to restore the smart key system to the active state from the canceled state.


        1. Perform the procedures to cancel the smart key system again.

        2. Check that the wireless buzzer sounds once (short beep) to confirm that the smart key system has been restored to the active state.

          Tech Tips


          • The system changes between the canceled state and the active state each time the procedure to cancel the system through manual operation is performed.

          • The buzzer sounds twice when the system changes from the active state to the canceled state, and sounds once when the system changes from the canceled state to the active state.