REAR DOOR LOCK INSPECTION


  1. INSPECT REAR DOOR LOCK WITH MOTOR ASSEMBLY LH


    1. A01I4C4E10
      Text in Illustration
      *a

      Component without harness connected

      (Rear Door Lock with Motor Assembly LH)
      *b Unlock
      *c Lock

      Check the operation of the door lock motor.


      1. Apply auxiliary battery voltage and check the operation of the door lock motor.

        OK
        Connection Result

        Auxiliary battery positive (+) → Terminal 4 (L)

        Auxiliary battery negative (-) → Terminal 1 (UL)

        		 Locks

        Auxiliary battery positive (+) → Terminal 1 (UL)

        Auxiliary battery negative (-) → Terminal 4 (L)

        		 Unlocks

        If the result is not as specified, replace the rear door lock with motor assembly LH.

    2. A01I4C4E11
      Text in Illustration
      *a

      Component without harness connected

      (Rear Door Lock with Motor Assembly LH)
      *b Unlock
      *c Lock

      Check the operation of the unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        6 (LSSR) - 9 (E) Locked 10 kΩ or higher
        6 (LSSR) - 9 (E) Unlocked Below 1 Ω

        If the result is not as specified, replace the rear door lock with motor assembly LH.

  2. INSPECT REAR DOOR LOCK WITH MOTOR ASSEMBLY RH


    1. A01I2Y3E09
      Text in Illustration
      *a

      Component without harness connected

      (Rear Door Lock with Motor Assembly RH)
      *b Unlock
      *c Lock

      Check the operation of the door lock motor.


      1. Apply auxiliary battery voltage and check the operation of the door lock motor.

        OK
        Connection Result

        Auxiliary battery positive (+) → Terminal 4 (L)

        Auxiliary battery negative (-) → Terminal 1 (UL)

        		 Locks

        Auxiliary battery positive (+) → Terminal 1 (UL)

        Auxiliary battery negative (-) → Terminal 4 (L)

        		 Unlocks

        If the result is not as specified, replace the rear door lock with motor assembly RH.

    2. A01I2Y3E10
      Text in Illustration
      *a

      Component without harness connected

      (Rear Door Lock with Motor Assembly RH)
      *b Unlock
      *c Lock

      Check the operation of the unlock detection switch.


      1. Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        6 (LSSR) - 9 (E) Locked 10 kΩ or higher
        6 (LSSR) - 9 (E) Unlocked Below 1 Ω

        If the result is not as specified, replace the rear door lock with motor assembly RH.