BLIND SPOT MONITOR SENSOR REMOVAL

Note

Replace the blind spot monitor sensor if it has been dropped or subjected to a severe impact.


  1. REMOVE REAR BUMPER ASSEMBLY

    Click here

  2. REMOVE BLIND SPOT MONITOR SENSOR LH WITH COVER


    1. A01I29H

      Disconnect the connector.

    2. Remove the 3 nuts to remove the blind spot monitor sensor LH with cover.

  3. REMOVE BLIND SPOT MONITOR SENSOR RH WITH COVER


    1. A01I4L7

      Disconnect the connector.

    2. Remove the 3 nuts to remove the blind spot monitor sensor RH with cover.

  4. REMOVE BLIND SPOT MONITOR COVER LH


    1. A01I3SD

      Disengage the 3 claws to remove the blind spot monitor cover LH.

  5. REMOVE BLIND SPOT MONITOR COVER RH


    1. A01I3V3

      Disengage the 3 claws to remove the blind spot monitor cover RH.

  6. REMOVE BLIND SPOT MONITOR SENSOR LH

  7. REMOVE BLIND SPOT MONITOR SENSOR RH