NAVIGATION RECEIVER INSTALLATION


  1. INSTALL NAVIGATION RECEIVER ASSEMBLY

  2. INSTALL STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio)

  3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    1. Engage the 2 clips to install the air conditioning control assembly.

  4. INSTALL NO. 1 RADIO RECEIVER BRACKET


    1. w/o Satellite Radio:


      1. Install the No. 1 radio receiver bracket with the 5 screws.

    2. w/ Satellite Radio:


      1. Install the No. 1 radio receiver bracket with the 7 screws.

  5. INSTALL NO. 2 RADIO RECEIVER BRACKET


    1. w/o Satellite Radio:


      1. Install the No. 2 radio receiver bracket with the 5 screws.

    2. w/ Satellite Radio:


      1. Install the No. 2 radio receiver bracket with the 7 screws.

  6. INSTALL NAVIGATION WIRE (w/ Satellite Radio)


    1. Connect each connector to install the navigation wire.

  7. INSTALL NAVIGATION RECEIVER ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY


    1. Connect each connector.

    2. Engage the 4 clips to the vehicle body to temporarily install the navigation receiver assembly with air conditioning control assembly.

    3. Install the navigation receiver assembly with air conditioning control assembly with the 4 bolts and 2 screws.

  8. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. Connect each connector.

    2. A01I60M

      Engage the guide and 2 clips as shown in the illustration.

    3. Install the upper console panel sub-assembly with the 2 screws <C> or <D>.

  9. INSTALL NO. 1 SPEAKER OPENING COVER ASSEMBLY


    1. Connect the connector.

    2. Engage the clamp.

    3. A01I4AX

      Engage the 11 clips to install the No. 1 speaker opening cover assembly as shown in the illustration.

  10. INSTALL REAR CONSOLE UPPER PANEL SUB-ASSEMBLY


    1. Engage the 6 clips.

    2. Install the rear console upper panel sub-assembly with the 2 screws <C> or <D>.

    3. Connect the connector.

    4. Move the shift lever to P.

  11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    1. A01I338

      Turn the shift lever knob sub-assembly clockwise to install the shift lever knob sub-assembly.

    2. A01I4IT

      Engage the 2 claws as shown in the illustration.

  12. INSTALL UPPER CONSOLE BOX SUB-ASSEMBLY


    1. Connect each connector.

    2. Engage the 4 clips to install the upper console box sub-assembly.

  13. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  14. INSTALL LUGGAGE TRIM SERVICE HOLE COVER


    1. Engage the claw to connect the luggage trim service hole cover.

  15. REPLACED OPERATION (w/ Parking Assist Monitor System)

    Click here