AUDIO AND VISUAL SYSTEM (w/ DVD Player) Touch Panel Switch does not Function

INSPECTION PROCEDURE

Note

Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System Click here.

PROCEDURE


  1. CHECK MULTI-DISPLAY


    1. Check if there is any foreign matter caught between the display and exterior frame of the multi-display.

      OK
      No foreign matter is caught between the display and exterior frame of the multi-display.

      Tech Tips

      If there is foreign matter between the display and exterior frame of the multi-display, the touch panel will remain pressed, preventing touch switch operation.


    NG

    REMOVE FOREIGN MATTER

    OK

  2. CHECK TOUCH PANEL


    1. Check for foreign matter on the display.

      OK
      The display is clean.

    NG

    CLEAN DISPLAY AND RECHECK TOUCH PANEL

    OK

  3. CHECK TOUCH SWITCH (OPERATION CHECK)

    A01I3GX

    1. Enter the "Touch Switch Check" screen. Refer to Check Touch Switch in Operation Check Click here.

    2. Touch the display in the area where the switch malfunction occurs.

      OK
      A "+" mark appears at the touched position.

    NG

    PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE Click here

    OK

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here