AUDIO AND VISUAL SYSTEM (w/o DVD Player) CD cannot be Inserted / Played or CD is Ejected Right After Insertion

INSPECTION PROCEDURE

PROCEDURE

1. CHECK IF A PROPER CD IS INSERTED

   
   

   1. Make sure that the CD is an audio CD or a CD with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      OK
      CD is normal.

      Tech Tips

      
      

      • Translucent or uniquely-shaped CDs cannot be played.

      • CDs with adhesive paper labels should not be played.

      • Commercial audio CDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3, WMA and AAC files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs, refer to the Owner's Manual.

   
   

   NG

   END (CD IS FAULTY)

   OK

2. CHECK THAT CD IS INSERTED PROPERLY

   
   

   1. Check if the CD is inserted upside down.

      OK
      CD is properly inserted.

   
   

   NG

   INSERT CD PROPERLY

   OK

3. CLEAN CD AND RECHECK

   
   

   1. 

      Disc cleaning

      
      

      1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

         OK
         Malfunction disappears.

         Note

         Do not use a conventional record cleaner or anti-static preservative.

   
   

   NG

   REPLACE CD AND RECHECK Click here

   OK

   END (CD WAS DIRTY)

4. REPLACE CD AND RECHECK

   
   

   1. Replace the CD with a known good one and check that the malfunction disappears.

      OK
      Malfunction disappears.

   
   

   NG

   REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here

   OK

   END (CD WAS FAULTY)