PARKING BRAKE CABLE REMOVAL

Tech Tips


  • The following procedure is for the No. 1 parking brake cable assembly, No. 3 parking brake cable assembly and No. 4 parking brake cable assembly.

  • Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.


  1. REMOVE PARKING BRAKE CONTROL PEDAL ASSEMBLY

    Click here

  2. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY


    1. A01I43W

      Pull up the parking brake pedal claw.

      Note

      Do not damage the No. 1 parking brake cable assembly.

    2. A01I404

      Remove the adjusting nut.

    3. A01I646

      Remove the clip from the No. 1 parking brake cable assembly.

    4. Remove the No. 1 parking brake cable assembly from the parking brake pedal assembly.

  3. REMOVE REAR DOOR SCUFF PLATE LH


    1. A01I3SV

      Disengage the 6 claws and remove the rear door scuff plate LH.

      Tech Tips

      Disengage the claws from the rear side of the scuff plate.

  4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH


    1. Disconnect the rear door opening trim weatherstrip LH.

  5. REMOVE LAP BELT OUTER ANCHOR COVER (for LH Side)


    1. Remove the rear door opening trim weatherstrip LH.

  6. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY LH


    1. A01I5ER

      Remove the bolt and disconnect the floor anchor of the front seat outer belt assembly.

  7. REMOVE CENTER PILLAR LOWER GARNISH LH


    1. A01I44B

      Disengage the 2 claws and 3 clips, and remove the center pillar lower garnish LH.

  8. REMOVE REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure as for the LH side.

  9. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure as for the LH side.

  10. REMOVE LAP BELT OUTER ANCHOR COVER (for RH Side)

    Tech Tips

    Use the same procedure as for the LH side.

  11. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  12. REMOVE CENTER PILLAR LOWER GARNISH RH

    Tech Tips

    Use the same procedure as for the LH side.

  13. REMOVE FRONT SEAT ASSEMBLY LH


  14. REMOVE FRONT SEAT ASSEMBLY RH

    Tech Tips

    Use the same procedure as for the LH side.

  15. REMOVE AUDIO AMPLIFIER COVER (for 10 Speakers)


    1. A01I536

      Using a clip remover, remove the 2 clips and audio amplifier cover.

  16. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET (for 10 Speakers)


    1. A01I504

      Remove the bolt and disconnect the ground wire.

    2. Disconnect each connector and disengage the clamp.

    3. A01I40V

      Remove the bolt.

    4. Disengage the 2 guides and remove the stereo component amplifier assembly with bracket.

  17. REMOVE AUDIO AMPLIFIER COVER (w/ Manual (SOS) Switch)


    1. A01I2BA

      Using a clip remover, remove the 2 clips and audio amplifier cover.

  18. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BACK-UP BATTERY (w/ Manual (SOS) Switch)


    1. A01I3K2

      Disconnect each connector.

    2. Disengage the 3 clamps.

    3. A01I59U

      Remove the bolt.

    4. Disengage the 2 guides and remove the DCM (telematics transceiver) with back-up battery.

  19. REMOVE FLOOR CARPET HOOK


    1. A01I2HBE02
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Disengage the 6 guides.

    2. A01I42IE02
      Text in Illustration
      *A for LH Side
      *B for RH Side

      Disengage the 6 claws and remove the 6 floor carpet hooks.

  20. REMOVE NO. 4 CROSS MEMBER FLOOR REINFORCEMENT SUB-ASSEMBLY


    1. A01I53I

      Remove the screw.

    2. A01I4XJ

      Disengage the guide to disconnect the fuel lid lock open lever sub-assembly as shown in the illustration.

    3. Turn back the floor carpet to a position where the No. 4 cross member floor reinforcement sub-assembly can be removed.

    4. A01I3FK

      Remove the 8 bolts and No. 4 cross member floor reinforcement sub-assembly.

  21. REMOVE NO. 4 PARKING BRAKE CABLE ASSEMBLY


    1. A01I62SE01
      Text in Illustration
      *1 Parking Brake Equalizer
      *2 No. 2 Parking Brake Cable Assembly
      *3 No. 3 Parking Brake Cable Assembly
      *4 No. 4 Parking Brake Cable Assembly

      Separate the No. 3 parking brake cable assembly from the parking brake equalizer.

    2. Separate the No. 2 parking brake cable assembly to remove the parking brake equalizer.

    3. A01I3HLE01
      Text in Illustration
      *1 Rubber Boot
      *2 Parking Brake Equalizer
      *3 No. 4 Parking Brake Cable Assembly

      Slide the parking brake equalizer and rubber boot.

    4. Remove the No. 4 parking brake cable assembly from the parking brake equalizer.

  22. REMOVE FRONT EXHAUST PIPE ASSEMBLY

    Click here

  23. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR


    1. A01I2MB

      Remove the 3 nuts and front No. 2 floor heat insulator.

  24. REMOVE PARKING BRAKE SHOE LEVER

    Click here

  25. REMOVE NO. 2 FLOOR UNDER COVER (for LH Side)


    1. A01I2OV

      Remove the 2 bolts, screw and 2 clips.

      Text in Illustration
      A01I3Q9 Bolt
      A01I679 Screw
      A01I4CJ Nut (attached to under cover)

    2. Disengage the 3 nuts and remove the No. 2 floor under cover.

  26. REMOVE NO. 1 FLOOR UNDER COVER (for RH Side)


    1. A01I2XQ

      Remove the 2 bolts and screw.

      Text in Illustration
      A01I3Q9 Bolt
      A01I679 Screw
      A01I4CJ Nut (attached to under cover)

    2. Disengage the 3 nuts and 2 clips, and remove the No. 1 floor under cover.

  27. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY


    1. A01I3WJ

      Remove the clip from the No. 3 parking brake cable assembly.

    2. A01I352

      Remove the bolt and separate the No. 3 parking brake cable assembly.

    3. Remove the 4 bolts, nut and No. 3 parking brake cable assembly.

      A01I2OO

  28. REMOVE NO. 2 PARKING BRAKE CABLE CLAMP


    1. Remove the No. 2 parking brake cable clamp.