FRONT BRAKE REASSEMBLY


  1. TEMPORARILY TIGHTEN FRONT DISC BRAKE BLEEDER PLUG

    Tech Tips

    Fully tighten the front disc brake bleeder plug after bleeding.

  2. INSTALL FRONT DISC BRAKE BLEEDER PLUG CAP

  3. INSTALL PISTON SEAL


    1. A01I4UK

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new piston seal.

      Text in Illustration
      A01I3GM Lithium Soap Base Glycol Grease

    2. Install the piston seal to the front disc brake cylinder.

      Note

      Securely install the piston seal to the groove of the front disc brake cylinder.

  4. INSTALL CYLINDER BOOT


    1. A01I4O6E03
      Text in Illustration
      *1 Cylinder Boot
      *2 Front Disc Brake Piston
      A01I3GM Lithium Soap Base Glycol Grease

      Apply a light layer of lithium soap base glycol grease to the entire circumference of a new cylinder boot and front disc brake piston.

    2. A01I2H7

      Install the cylinder boot to the front disc brake piston as shown in the illustration.

  5. INSTALL FRONT DISC BRAKE PISTON


    1. A01I3H2E01
      Text in Illustration
      *1 Front Disc Brake Piston
      *2 Cylinder Boot
      *3 Front Disc Brake Cylinder

      Install the cylinder boot to the front disc brake cylinder as shown in the illustration.

      Note


      • Securely install the cylinder boot into the groove of the disc brake cylinder and front disc brake piston.

      • Do not damage the cylinder boot.