BRAKE PEDAL REMOVAL


  1. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONING UNIT

    Click here

  2. REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY


    1. A01I2YP

      Disconnect the connector from the brake pedal stroke sensor assembly.

    2. A01I4B9

      Remove the 2 bolts and brake pedal stroke sensor assembly from the brake pedal support assembly.

      Note


      • Do not drop the brake pedal stroke sensor assembly.

      • If the brake pedal stroke sensor assembly has been dropped, replace the brake pedal stroke sensor assembly with a new one.

  3. REMOVE HEADLIGHT LEVELING ECU ASSEMBLY (w/ Automatic Headlight Beam Level Control System)


    1. A01I31WE01
      Text in Illustration
      *1 Clamp
      *2 Guide

      Disconnect the connector.

    2. Disengage the clamp.

    3. Remove the bolt.

    4. Disengage the 2 guides and remove the headlight leveling ECU assembly.

  4. REMOVE STOP LIGHT SWITCH ASSEMBLY


    1. A01I5N4

      Disconnect the connector.

    2. A01I51Y

      Turn the stop light switch assembly counterclockwise and remove it.

  5. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER

  6. REMOVE PUSH ROD PIN


    1. A01I46P

      Remove the clip and push rod pin.

    2. Separate the brake master cylinder push rod clevis from the brake pedal support assembly.

  7. REMOVE BRAKE PEDAL RETURN SPRING


    1. A01I5DH

      Remove the brake pedal return spring from the brake pedal support assembly.

  8. REMOVE BRAKE PEDAL SUPPORT ASSEMBLY


    1. A01I4GS

      Disengage the clamp.

    2. A01I5TJ

      Disengage the 3 clamps and separate the wire harness from the brake pedal support assembly.

    3. A01I3XH

      Remove the 4 nuts and brake pedal support assembly.