FRONT STABILIZER BAR INSTALLATION

INSTALL FRONT NO. 1 STABILIZER BAR BUSHING

1. 

   Text in Illustration

   *a	Cutout
   	Front of the Vehicle
   	Inside of the Vehicle

   Install the 2 front No. 1 stabilizer bar bushings to the front stabilizer bar as shown in the illustration.

   Note

   When installing the front No. 1 stabilizer bar bushings, make sure that the cutout faces the rear of the vehicle.

INSTALL FRONT STABILIZER BAR

1. Install the front stabilizer bar to the front frame assembly.

INSTALL FRONT NO. 1 STABILIZER BRACKET LH

1. Install the front No. 1 stabilizer bracket LH to the front frame assembly with the 2 bolts.

   Torque:

   27 N*m  { 275 kgf*cm, 20 ft.*lbf }

INSTALL FRONT NO. 1 STABILIZER BRACKET RH

INSTALL FRONT STABILIZER LINK ASSEMBLY LH

1. Install the front stabilizer link assembly LH to the front stabilizer bar with the nut.

   Torque:

   74 N*m  { 755 kgf*cm, 55 ft.*lbf }

   If the ball joint turns together with the nut, use a wrench to hold the stud bolt.

INSTALL FRONT STABILIZER LINK ASSEMBLY RH

INSTALL FRONT FRAME ASSEMBLY (When Using the Engine Support Bridge)

Click here

INSTALL ENGINE ASSEMBLY WITH TRANSAXLE (When Not Using the Engine Support Bridge)

Click here