SHIFT LEVER POSITION SENSOR REMOVAL


  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH

  2. REMOVE ENGINE UNDER COVER LH

  3. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

  4. REMOVE ENGINE UNDER COVER RH

  5. SEPARATE TRANSMISSION CONTROL CABLE ASSEMBLY


    1. A01I2XT

      Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.

    2. Using a screwdriver, disengage the 4 claws and disconnect the transmission control cable assembly with clip from the No. 1 transmission control cable bracket.

    3. Remove the clip from the transmission control cable assembly.

  6. REMOVE SHIFT LEVER POSITION SENSOR


    1. A01I32X

      Disconnect the connector from the shift lever position sensor.

    2. A01I5QC

      Remove the nut, washer, and control shaft lever from the manual valve shaft.

    3. A01I2MAE01
      Text in Illustration
      *1 Lock Plate

      Using a screwdriver, pry the tabs of the lock plate.

    4. A01I3ALE01
      Text in Illustration
      *1 Lock Nut
      *2 Lock Plate

      Remove the lock nut and lock plate from the manual valve shaft.

    5. A01I4CG

      Remove the 2 bolts and pull out the shift lever position sensor from the manual valve shaft.