DRIVING SUPPORT ECU INSTALLATION


  1. INSTALL DRIVING SUPPORT ECU ASSEMBLY


    1. A01I5EP

      Engage the 2 claws to install the driving support ECU assembly as shown in the illustration.

  2. INSTALL ECU INTEGRATION BOX RH


    1. Install the ECU integration box RH with the 2 nuts and bolt.

      Torque:
      Nut
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }
      Bolt
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    2. Engage the clamp.

    3. Connect each connector.

  3. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY


    1. A01I2NZ

      Connect the connector.

    2. Engage the glove compartment light as shown in the illustration.

    3. Engage the clamp.

    4. A01I54P

      Engage the guide and 2 clips.

    5. Install the lower instrument panel sub-assembly with the 5 screws <C> or <D>.

  4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here