CRUISE CONTROL SYSTEM ROAD TEST


  1. PROBLEM SYMPTOM CONFIRMATION


    1. A01I60T

      Inspect the SET function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Check that the cruise control indicator light illuminates on the combination meter sub-assembly.

      3. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      4. Push the cruise control switch to -/SET.

      5. A01I2BCE01
        Text in Illustration
        *1 Cruise Control Indicator Light
        *2 Cruise Control SET Indicator

        Check that the cruise control SET indicator light illuminates at this time.

      6. After releasing the switch, check that the vehicle maintains the set speed.

    2. A01I5NY

      Inspect the + (ACCEL) function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. Check that vehicle speed increases while the cruise control switch is pushed to +/RES, and that the vehicle maintains the newly set speed when the switch is released.

      5. Push the cruise control switch to +/RES and then release it immediately. Check that vehicle speed increases by approximately 1.0 km/h (1.0 mph) (tap-up control).

    3. A01I60T

      Inspect the - (COAST) function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. Check that vehicle speed decreases while the cruise control switch is pushed to -/SET, and the vehicle maintains the newly set speed when the switch is released.

      5. Push the cruise control switch to -/SET, and then release it immediately. Check that vehicle speed decreases by approximately 1.0 km/h (1.0 mph) (tap-down control).

    4. A01I2F0

      Inspect the CANCEL function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. When any of the following are performed, check that cruise control system control of vehicle speed is canceled and that the normal driving mode (no control of vehicle speed by the cruise control system) resumes.


        • Depressing the brake pedal.

        • Moving the shift lever from D to any other position.

        • Pulling the cruise control switch to CANCEL.

        • Turning the cruise control system off using the cruise control switch (ON-OFF button).

    5. A01I5NY

      Inspect the RES (RESUME) function.


      1. Turn the cruise control system on using the cruise control switch (ON-OFF button).

      2. Drive at a speed between 40 km/h (25 mph) and 200 km/h (125 mph).

      3. Push the cruise control switch to -/SET.

      4. Cancel cruise control system control of vehicle speed by performing any of the above operations (other than turning the cruise control system off using the cruise control switch (ON-OFF button)).

      5. After pushing the cruise control switch to +/RES at a speed of more than 40 km/h (25 mph), check that the vehicle resumes the speed set prior to cancellation.