FUEL PUMP REASSEMBLY


  1. INSTALL FUEL PUMP


    1. A01I46AE01
      Text in Illustration
      *1 O-ring
      *2 Spacer

      Apply gasoline to a new O-ring. Then install the O-ring and spacer to the fuel pump.

    2. A01I379E01
      Text in Illustration
      *1 Fuel Filter
      *2 Suction Filter

      Engage the 5 claws of the fuel pump.

      Note


      • Make sure that the O-ring is not cut or pinched during the installation.

      • Engage the claws securely.

      • Do not remove the suction filter.

      Tech Tips

      Perform "Inspection After Repair" after replacing the fuel pump assembly Click here.

    3. A01I663

      Engage the 2 claws of the No. 1 fuel suction support.

    4. Connect the fuel pump harness connector.

    5. A01I4DZ

      Engage the 2 claws of the No. 1 fuel suction support and install the fuel filter and the fuel pump onto the fuel sub-tank.

    6. A01I4VF

      Align the groove of the fuel pump filter hose with the cutout of the fuel sub-tank and install the hose.

      Note

      Do not apply excessive force to the fuel tube or the suction support.

    7. Connect the connector of the fuel pump harness.

  2. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. A01I3IEE02

      Install the fuel sender gauge assembly by sliding it downward.

    2. Connect the connector of the fuel sender gauge assembly.

    3. Install the harness protector.

      Note

      Do not damage the wire harness.

    4. A01I4OY

      Connect the 3 harness clamps.

      Note

      Do not damage the wire harness.